Matt Lenart

Matt Lenart is a C-Arm Engineer at Block Imaging. Matt travels to customer sites to perform preventative maintenance, repairs, and troubleshoot C-Arm equipment issues. When he’s not turning the wrench Matt can be found spending time with his family, enjoying a craft beer, and cheering on THE Ohio State football team.

How to Replace Coin Cell Batteries in OEC 9900 SBCs

Proper maintenance often includes small but essential tasks like replacing coin cell batteries that end up playing a crucial role in keeping your OEC 9900 running well. Whether you're a master technician or figuring this out for the first time, this tutorial will cover what you need to know about replacing these batteries.

 

How to Access and Change the Batteries

  1. Remove the Back Panel
  2. Open the Access Panel
  3. Identify Single Board Computers
  4. Replacing Coin Cell Batteries

 

Service Mode Changes

  1. How to Enable Service Mode
  2. How to Access the BIOS
  3. Save and Exit the BIOS
  4. Confirm System Operation

 

 

 

How to Connect an OEC 9900 & 9800 DICOM to PACS

Connecting an OEC 9900 and 9800 DICOM to PACS doesn't have to be difficult. We've put together a...

4 Common C-Arm Problems and Solutions

Equipment malfunctions are inevitable. 

How to Diagnose X-Ray Switch Errors for OEC C-Arms

Like any piece of medical imaging equipment, C-arms can experience errors and problems. You or your...

How to Change Batteries on an OEC 9800 or 9900 C-Arm

As anyone who owns a cellphone can tell you: batteries don't last forever! Even rechargeable...